Section 3 | Force Standards Section

Overview

Staff


  1. ROLLY C. MEDIALDEA – Section head
  2. LUIS F. OCCIANO

Traceability

Traceability

force


Services

Services


 

Force Standards Section conducts calibration/testing of the following equipment:

 

  • Testing Machines such as universal testing machine, tensile testing machine, compression testing machine, etc.
  • force gauge
  • dynamometer
  • push-pull scale
  • axle weighing system (static mode only);
  • Durometer (Type A & B only)
  • torque meter
  • torque wrenches
  • spring torque testers
  • torque drivers

 

 

Calibration Method


 

 

Testing Machine:  The procedure is based on International Standard (ISO) 7500/1.

 

Brief Description of Calibration Method:

 

The unit under calibration (UUC) is subjected to specified force values which were applied on the force-proving instrument and readings are noted.

 

Torque Meter: ASTM Designation: D 3474-90

 

Brief Description of Calibration Method:

 

Torque values are obtained by means of vertically suspended dead weights acting at specific distances from the axis of rotation of the tester.